The AEQ8010S graphic equalizer contains two channels, left channel and right channel. Each channel has ten EQ bands. Each EQ band can provide up to +/- 12dB audio boost/cut range. An audio spectrum analyzer display containing ten LED columns is located in-between the left channel EQ bands and the right channel EQ bands. Each LED column depicts the summation of the audio levels of the corresponding EQ bands in the right and left channels. At the center of the knob of each EQ band slide, there is a red LED light indicator to enhance the entertainment effectiveness.
With the built-in features of two tape inputs/outputs and the main line inputs/output, the AEQ8010S graphic equalizer is designed to be versatile and convenient by allowing the users not only to enable or disable the EQ function to the line inputs/output but also to "dub" between two tape decks with or without the EQ function. In addition, a tape monitor function is included.
As a result, the AEQ8010S graphic equalizer provides the users with not only the extraordinary sound EQ quality and the extreme application versatility, but also the pleasant display and entertainment effectiveness.
* No Power ON/OFF Popping Noise
* 2 Line Inputs / 2 Tape Inputs
* 1 Line Output / 2 Tape Outputs
* 10 Band Audio Spectrum Analyzer Display
* 10 Band Per Channel / Two Channels
* Tape 1-2 or Tape 2-1 Dubbing Function
* Tape Monitor Function
* EQ/Pass Function
* Record EQ Function
* Variable LED Lighting Patterns
* Input Voltage Selection (120V / 240V)
Number of Channels: Two
Number of Bands/Channel: 10
Center Frequencies: (Hz) 30, 60, 125, 250, 500, 1K, 2K, 4K, 8K, 16K Hz
Booth/Cut Range: 12 +/- 2 dB
Input Input Impedance: - 47K Ohms
Nominal Input Level: - 0.3V
Output: Impedance -1K Ohms; Nominal Load Impedance -10K Ohms; Maximum Output Level - 4V
Frequency Response: 10 - 100K Hz, +/- 1dB
Total Harmonic Distortion: 0.01%
Signal/Noise Ratio: 85dB
Power Consumption: 12W
Dimensions (W X D X H): 19.2" X 12.2" X 4.2"
Weight: 6.6 lbs
|Brand Name||Audio 2000|