This CDMIX 1 is an update to the classic version by the same name. Since 1997, DJs all over the world have experienced the ease of use and superior portability of the Numark's CDMIX series. The series also includes HDMIX, KMX02, and the CDMIX line.
Because CDMIX 1 is designed for professional use, it is housed in a metal chassis for years of rugged, reliable performance. For even more ruggedization, check out our CDMIX CASE 3 for secure transport.
FULL-FEATURED CD PERFORMANCE
CDMIX 1 contains a dual-deck CD player with all of the functionality and capabilities you’d expect in a standalone unit. You can quickly access the point in the track you want on its easy-to-use multifunction jog/shuttle wheels. The wheels are also helpful for controlling pitch bend. You can pitch tracks up and down by 12% for easy beat matching. And for assisting with beat matching, CDMIX 1 has a built-in BPM counter with tap tempo. Just tap to the beat.
In addition to standard single-track and continuous playback, CDMIX 1's programmable playback mode enables you to set up a sequence of tracks for convenient playback. You can set cue points on the fly for creative performance.
CDMIX 1 also has Fader Start, which can automatically start cued-up playback when you move the crossfader. The CD drives work on a tray-loading system that plays full-sized and mini discs. This type of drive is more reliable and professional than slot-loading units because dirt and grime on the drive slots can degrade your CDs' performance as they are dragged across.
COMPLETE MIX CONTROL
CDMIX 1’s mixer section is also a complete component that is on par with standalone mixers. It’s based on a two-channel design with a mic channel, replaceable crossfader, and pre-fader cueing controls.
For the two main channels, you can switch between the onboard CD players or rear-panel RCA inputs for additional CD players, iPods, or turntable with preamps such as our TTXUSB or TTi. Above the Master fader, you can switch the output between stereo and mono to accommodate different kinds of PA setups. The cueing section gives you both 1/4” and 1/8” stereo headphone outputs with level control.
For optimizing system response, CDMIX 1 has a three-band EQ, and you can watch your levels on its stereo, tri-color LED meter. CDMIX 1 has professional outputs on both XLRs and RCAs for compatibility with most systems. There’s also a Record output so you can capture your set or send your mix to an auxiliary PA system. If you find yourself working outside, remotely, or on a cruise ship CDMIX1 even has a 12VDC power input so you can run it with a power supply or car battery. Of course, CDMIX 1 also runs on a standard wall-power connection for those more-traditional gigs indoors.
Whether you want an all-in-one system for getting into and out of the gig in the minimum amount of time or you’re looking for a rock-solid backup system that even plays even difficult discs, CDMIX 1 is the way to go.
Single, compact unit with dual-CD player and mixer
Fast setup and teardown
Perfect backup or second system
Housed in a metal chassis for rugged, reliable performance
Multifunction jog/shuttle wheels for search and pitch bend
Beat match with ±12% pitch control and BPM counter with tap tempo
Single, continuous, and programmable playback with cue points for CD and CD-R
Fader Start automatically starts playback when you move the crossfader
Two-channel mixer with mic channel, replaceable crossfader, and PFL cueing
RCA inputs for connecting additional CD players, iPods, or turntables with preamps
Stereo and mono output for different kinds of PA setups
1/4” and 1/8” stereo headphone outputs with level control
Three-band EQ and stereo, tri-color LED metering
Professional master outputs on both XLRs and RCAs; Record output
Works with wall power, 12VDC power supply or car battery
2 independent CD units
Ability to play 3" and 5" CDs
Plays CD and CDR (recordable CDs)
Pitch/Jog Wheel for both setting cue points and adjusting tempo
3 search speeds
Large backlit LCD Display
Track sequence programming
Time button with elapse and remain time bar
Pitch percentage display
±12% pitch adjustment
Auto dead space elimination
Ability to autostart player with use of the crossfader
External inputs for 2 Line inputs
Master balanced/unbalanced and record output
Direct input for onboard CD units
Input for External Microphone with independent gain control
Crossfader to blend between 2 Channels and control Auto start of the CD units
Three band Equalizer for master output
Dual Band, 12-segment LED output display
Fader CD Start button
Headphone output for 1/4" and 1/8" style plugs with the ability to cue any channel
12VDC power input to allow car battery usage