QSC GX5 Power PA Amplifier

The GX5 uses a Class H system, based on key elements of the PL Series, (PLX, PL3, CX, DCA) almost doubling power in the same size and weight. QSC design expertise allows the output devices to shift from low-power to high-power rails in less than a millionth of a second, ensuring that the output power is always right where it needs to be without excess loss.

Features:

    * Power levels matched to the most popular speakers used by entertainers
    * Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
    * Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
    * Outputs: Speakon® combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
    * Minimum depth chassis (10.1"/257 mm) fits in compact, inexpensive effects racks
    * Lightweight - GX3 and GX5 less than 26 lbs (12.5 kg). GX7 only 15.5 lbs (7 kg)*
    * Detented gain controls for precise setting and matching of sensitivity
    * GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
    * Front panel LEDs monitor Power, Signal and Clipping
    * Subwoofer/Satellite crossover built-in

Specifications:

 <b>Output Power</b>
* Dual channels mode:
    8Ω per channel-500W
    4Ω per channel-700W
* Bridged-Mono mode:
    8Ω-600W
    4Ω-800W

* Signal to Noise (20 Hz - 20 kHz): 100 dB
* Input Sensitivity:1.2 Vrms
* Voltage Gain (8 ohms): 34.4 dB
* Output Circuitry: Class B
* Frequency Response: 20 Hz - 20 kHz, +0, -1 dB
* Dynamic Headroom (4 ohms): 2 dB
* Input Impedance (ohms): Greater than 20k (balanced)
* Maximum Input Level: +24 dB (16 Vrms)
* Input Connectors (each channel): 3-pin XLR and 1/4" TRS, balanced, parallel
Phono, unbalanced
* Output Connectors (each channel): Speakon, 1/4", Binding Posts

Dimensions & Weight
    * Dimensions: 19"W x 3.5"H x 10.1"D
    * Weight: 28lb.